Komatsu PC88MR-10 Shop Manual page 1204

50 Disassembly and assembly
Cab and its attachments
12.Remove bracket (18), clip (19) and harness
clamp (20), and then remove duct (21).
13.Disconnect radio antenna cable (22).
14.Disconnect connectors AC01 (24), AC02 (25)
and ACECU (26) from air conditioner controller
(23).
15.Remove harness clamp (27).
50-176
16.Disconnect connectors H09 (28), H16 (29) and
H08 (30).
17.Remove connector T02 (31).
18.Remove harness clamps (32), (33) and (34).
19.Disconnect connectors M09 (35) and M1A (36).
20.Remove harness clamp (37).
21.Disconnect connectors CK01 (38), CK02 (39)
and M10 (40).
22.Remove harness clamps (41) and (42).
23.Disconnect connector H15 (43).
24.Remove harness clamp (44).
PC88MR-10