14.Remove mounting bolts (16) (2 pieces).
15.Rotate frame (17) as shown in the photo.
16.Disconnect hoses (18) to (24) (7 pieces) from
the oil pressure pump.
(18): P3 port hose
(19): P2 port hose
(20): P1 port hose
(21): PLS port hose
(22): PPLS port hose
PC88MR-10
50 Disassembly and assembly
(23): PEPC source pressure input port hose
(24): Pd (drain) port hose
17.Disconnect clamps (25) and (26).
18.Remove clamp (28) and bracket (29) as a unit,
disconnect hydraulic oil temperature sensor
connector P22 (30) and PC-EPC valve
connector V11 (31) from bracket (33).
19.Remove mounting bolts (32) (2 pieces) and
bracket (33) for easier operation.
Engine and cooling system
50-51