Komatsu PC88MR-10 Shop Manual page 1056

50 Disassembly and assembly
Engine and cooling system
9. Remove mounting bolts (6) (4 pieces), and
remove bracket (7).
10.Disconnect the air conditioner compressor
assembly, and reposition it out of the way for
working. For details, see "Removal and
installation of air conditioner compressor
assembly".
a Do not disconnect the hose.
11.Remove clamp (7), and remove aftercooler
upper hose (8). [*1]
12.Remove clamp (9), and remove KCCV piping
(10). [*2]
13.Remove clamp (10a), and remove hoses (11)
and (12). [*3]
14.Remove clamp (13), and air cleaner hose (14).
[*4]
15.Remove lubricating oil drain tubes (15) and
(15a).
50-28
16.Disconnect connector VFT (16).
17.Disconnect clamp (17), and disconnect turbo
charger assembly (19) from tube (18) on the air
intake outlet side. [*5]
18.Remove KDOC assembly. For details, see
"Removal and installation of KDOC assembly".
19.Remove mounting bolts (20) (3 pieces), and
remove turbo charger cover (21). [*6]
PC88MR-10