Komatsu PC88MR-10 Shop Manual page 1215

a When sticking the dam rubber, do not touch
the cleaned surface.
a Be sure that the dam rubber in each sticking
corner sticks thoroughly to the corner.
a When bonding dam rubber (7) around a
window, be careful to prevent its overlapping
in the meeting area of the starting and ending
points. Or provide a clearance of 5 mm or so
in meeting area (e).
1) Attach dam rubber (7) for right side window
glass (1) to the position indicated in the
figure.
a Attach additional dam rubber (7a) for right
side window glass (1).
Right side window glass additional dam
rubber mounting position:
(f): 140 mm
(g): 500 mm
PC88MR-10
50 Disassembly and assembly
2) Attach dam rubber (7) for left side rear
window glass (2) to the position indicated in
the figure.
3) Attach dam rubbers (7) for door upper
window glass (3) and door lower window
glass (4) to the position indicated in the
figure.
(Figure shows the door upper window glass)
(Figure shows the door lower window glass.)
Cab and its attachments
50-187