Removal And Installation Of Komtrax Terminal Assembly - Komatsu PC88MR-10 Shop Manual

Removal and installation of KOMTRAX terminal assembly

Place the machine on a level ground and
lower the work equipment to the ground in a
stable posture.
Stop the engine, turn the battery disconnect
switch to OFF position, and remove the key.
(For details, see "Testing and adjusting",
"Handling battery disconnect switch".)
Set the lock lever in LOCK position.
Disconnect the cable from the negative (-)
terminal of the battery.
Removal
(PC88MR-Q210-520-K-00-A)
1. Remove upper side cover (1) at the rear side of
the operator's seat.
2. Disconnect antenna cable (2).
3. Disconnect connector (3).
4. Disconnect connectors CK01 (4) and CK02 (5).
5. Remove mounting bolts (6) (4 pieces), and
remove KOMTRAX terminal assembly (7).
Installation
(PC88MR-Q210-720-K-00-A)
Perform installation in the reverse order to
removal.
PC88MR-10
50 Disassembly and assembly
Electrical system
(PC88MR-Q210-924-K-00-A)
50-223