50 Disassembly and assembly
Engine and cooling system
11.Remove mounting bolts (12) (2 pieces), and
remove clamp (13).
12.Remove joint bolts (14) and (15), and
disconnect fuel tubes (16) and (17). [*2]
13.Remove joint bolt (18), and disconnect fuel hose
(19). [*3]
14.Remove fuel spray prevention caps (21) (2
pieces) of fuel high-pressure pipe (20). [*4]
15.Remove fuel high-pressure pipes (20). [*5]
a When removing the fuel high-pressure pipe,
be careful not to apply excessive force to the
tube.
16.Remove joint bolt (22), and disconnect tube
(23).
17.Remove mounting bolts (24) (4 pieces).
50-18
18.Remove mounting bolts (25), and remove
supply pump assembly (26) together with the
gear. [*6]
19.Loosen nut (27).
a Do not remove nut (27) from the shaft.
20.Install tool A1 in between the flange and gear
(31) of the supply pump.
PC88MR-10