Table of Contents
Advertisement
ID61/62 Series Panel - Installation, Commissioning & Configuration Manual
1
or
2
8
EN54-2 : 8.2.4 g)
If a fault-routing output is
configured, a fault-routing
output transmission circuit
fault indication must be
provided.
2
6
DISABLEMENT
TEST
POWER SUPPLY FAULT
EARTH FAULT
DELAYS ACTIVE
FIRE OUTPUT: FAULT / DISABLED
SYSTEM FAULT
FIRE OUTPUT ACTIVE
SOUNDER: FAULT / DISABLED
POWER
FIRE CONTROL O/P: FAULT / DISABLED
PLANT ALARM
FAULT O/P: FAULT / DISABLED
DISABLEMENT
TEST
POWER SUPPLY FAULT
DELAYS ACTIVE
EARTH FAULT
SYSTEM FAULT
FIRE OUTPUT: FAULT / DISABLED
FIRE OUTPUT ACTIVE
SOUNDER: FAULT / DISABLED
PLANT ALARM
POWER
FIRE CONTROL O/P: FAULT / DISABLED
PRE- ALARM
SOUNDERS SILENCED
[Setup] Language =
> : Change
2 Press the '
[Setup]
> : Change
3 Press the '
4 Press '
5.5.1.4 LED 1H Mode
The default function of this LED is PLANT ALARM. This
option allows the LED to be configured as FAULT O/P:
FAULT/DISABLED.
1 From the Setup menu screen, using the numeric
1
[Setup] Language =
> : Change
2 Press the '
or
8
[Setup]
> : Change
FAULT
3 Press the '
[Setup]
> : Change
PRE- ALARM
4 Press '
5.5.1.5 LED 2C Mode
The default function for this LED is PRE-ALARM. This
option allows this LED on panels with the new 5-button
membrane to be configured as SOUNDERS SILENCED.
FAULT
[S1
Setup]
2: Site Details
[S1
1 From the Setup menu, using the numeric keypad press
39
The Language screen is displayed first.
English
/
' buttons to step through the Panel
2
8
Options menus until the Control Keys screen is displayed.
Control Keys Access Level = 2
' button to change the setting to level 1
6
(no passcode) or level 2 (user passcode). The default
access level is level 2.
' to return to the Setup menu. All changes
4
will be saved on exiting.
keypad press the '
' button to enter the Panel
1
Options menu. The Language screen is displayed first.
/
' buttons to step through the Panel
2
8
Options menus until the LED 1H Mode screen is
displayed.
LED 1H =
' button to toggle the LED function.
6
LED 1H =
' to return to the Setup menu screen. All
4
changes will be saved on exiting.
1: Panel Options
3: Device Options
Setup]
4: Peripheral Options
5: Day / Night Settings
the '
' button to enter the Panel Options menu. The
1
: More
< : Exit
: More
< : Exit
English
: More
< : Exit
Plant Alarm
: More
< : Exit
Fault Output: F/D
: More
< : Exit
: More
: More
997-457-000-8, Issue 8
January 2010
Advertisement
Table of Contents
