Soak Timer; Zone Texts - Honeywell NOTIFIER ID62 Installation, Commissioning & Configuration Manual

Hide thumbs Also See for NOTIFIER ID62:
Table of Contents

Advertisement

ID61/62 Series Panel - Installation, Commissioning & Configuration Manual
CAUTION:
This product is not compliant
EN
EN
12094-1
12094-1
with EN 12094-1.
!
!
Fire extinguishing installations in
Europe are required to be certified as
compliant to this standard.
4

5.7.10 Soak Timer

The Soak Timer allows the extinguishing output to be
activated for a specified time. If enabled, the
extinguishing output is activated for the period specified
by the Ext. System Soak Timer panel Setup option (see
Section 5.5.3.2 Extinguishing System Soak); if
disabled, the CBE rule activates associated outputs until
the panel is reset.
This option also affects the operation of device type MRL.
If enabled, associated MRL inputs will start the CBE Rule
extinguishing system delay (Section 5.5.3.1); if disabled,
the MRL inputs will start the CBE Rule immediately (for
Fire rules, will start the day mode delay, if active).
To enable/disable the Soak Timer:
CBE Rule: nn
1:Type 2:Filter
8:Soak Timer 9:Zones
1 Press the '
' button (using the numeric keypad) to
8
select the Soak Timer option from the menu below.
CBE Rule:nn
> : Change
: Accept
2 Press the '
/
2
Soak Timer Enable.
CBE Rule:nn
> : Change
: Accept
3 Confirm the selection by pressing the '
cancel the selection, press '

5.8 Zone Texts

The Zone Texts menu enables the editing or viewing of
text associated to a selected zone. To view or edit any
zone text descriptions, proceed as follows:
1 At the main Commissioning menu, using the numeric
keypad press the '
[S1 COMM]
1 : Setup
3 : CBE Rules
4 : Zones 5 : Access
2 The Zone Text menu is displayed. Enter the zone
number required using the numeric keypad, then press
the '
' button to select the zone.
5
[Zone Text]
Select Zone No __
3 The LCD then displays the existing 20-characters of
text assigned to the zone on the upper line.
[<blank/existing text
>:Next
<:Previous
89
Soak Timer Enable = [N]
< : Cancel
' buttons to selectY(es) or N(o) for
8
Soak Timer Enable = [Y]
< : Cancel
5
' button.
4
' button.
4
2 : Circuit
: More
>]
: Char
: Done
u1:Delete
u3:Insert
997-457-000-8, Issue 8
January 2010
' button. To

Advertisement

Table of Contents
loading

This manual is also suitable for:

Notifier id61

Table of Contents