Remote Sensor Board - Loma IQ2 Service Manual

ADDING A REMOTE SENSOR BOARD
The remote sensor board and how to fit it is shown in
in this section.
page 32
Terminal 1
Figure 13 Remote Sensor Board Loma Part Number 416244
The Optional External Sensor Connection Ladder Diagram
board can be found in the Wiring/Connections section of this manual. TBA1
connector identifiers can be found in
Figure 14 Remote Sensor Board Loma Part Number 416244
Fitting the Board
The board locates into connectors JP3 and JP4 the board will only locate one
way round, external connections are made using TBA1. Refer to
in this section.
page 32
Module 7026
TBA1
Figure 14
Connector TBA1
1 + EXT
2 - EXT
3 Binfull
4 PEC (Photo-eye)
5 Reject Confirm
6 Remote Calibrate
7 + Shaft Encoder
8 - Shaft Encoder
9 + EXT
10 - EXT
Configuration and Set up Information
Figures 13
on page 2
.
below
Function
and 15
below on
Sensor connections
for this
Figure 15
on
5-31