Loma Menu - Loma IQ2 Service Manual

LOMA MENU

The following list details the individual menu positions.
System config report?
* Dbug system BBAL
* Dbug mask
Diagnostics
View diagnostics?
Clear diagnostics?
Diagnostics report?
Clear fault log?
Copy product 1?
Update checksum?
There are no more menu positions for IQ2v1.0 software. For IQ2v1.1
Module 7026
This will only appear if the reports/logs package is in fitted. The
report contains the set up information for the detector.
Loma use only and contains no useful user information.
0
Loma use only and contains no useful user information.
Loma use only and contains no user information. Press
access the diagnostic menu options (provided the reports/logs
package is fitted). Pressing the [
" " " "
[
Pressing
" " " "
[
Pressing
" " " "
[
Pressing
serial link if the "Reports package" is used.
" " " "
[
Pressing
reports/log package is fitted.
" " " "
[
Pressing
copied to all other product memories, over writing all previously
stored data.
" " " "
[
Pressing
"Machine details" menu to display the checksum associated with the
currently fitted software.
Configuration and Set up Information
C
] key to return to "Diagnostics".
] to access Diagnostic error messages.
] will clear down the Diagnostic error log.
] will transmit the contents of the log down the
] will clear down the System error log provided the
] will cause the contents of product memory 1 to be
] will cause the Eprom "Epr checksum" display in the
" " " "
[
continued on next page.
] to
5-21