Table of Contents
Advertisement
1.3 Safety Precautions
The following messages inform how to make each connection. In most
cases, you will simply need to connect a standard cable.
Note:
Note:
Note:
UNO-3072 User Manual
Always disconnect the power cord from your chassis
whenever you are working on it. Do not connect while
the power is on. A sudden rush of power can damage
sensitive electronic components. Only experienced
electronics personnel should open the chassis.
Always ground yourself to remove any static electric
charge before touching UNO-3072. Modern elec-
tronic devices are very sensitive to static electric
charges. Use a grounding wrist strap at all times.
Place all electronic components on a static-dissipa-
tive surface or in a static-shielded bag.
If DC voltage is supplied by an external circuit,
please put a protection device in the power supply
input port.
8
Advertisement
Table of Contents
