Introduction; Safety Precautions - Advantech MIC-1810 User Manual

1.1

Introduction

The MIC-1810 is a standalone automation controller with integrated data acquisition
module and signal conditioning to provide digital I/O, analog I/O, and counter func-
tions. This controller also supports serial communication ports and several other net-
working interfaces. You can seamlessly integrate your applications into the MIC-1810
series and speed up your system development with these application-ready control-
lers. With multiple OS and driver support, such as Windows 10/7 and embedded
Linux, users can integrate applications easily in an application-ready platform that
can provide versatile functions to fulfill diverse requirements.
1.2

Safety Precautions

The following sections tell how to make each connection. In most cases, you will sim-
ply need to connect a standard cable.
Warning! Always disconnect the power cord from your chassis whenever you are
working on it. Do not connect while the power is on. A sudden rush of
power can damage sensitive electronic components. Only experienced
electronics personnel should open the chassis.
Warning! Toujours à la terre pour éliminer toute charge d'électricité statique avant
toucher MIC-1810. Appareils électroniques modernes sont très sensi-
bles à charges d'électricité statique. Utilisez un bracelet antistatique à
tout moment. Placez tous composants électroniques sur une surface
antistatique ou dans un statique-sac blindé.
Caution! Always ground yourself to remove any static electric charge before
touching MIC-1810. Modern electronic devices are very sensitive to
static electric charges. Use a grounding wrist strap at all times. Place all
electronic components on a static-dissipative surface or in a static-
shielded bag.
Caution! Toujours débrancher le cordon d'alimentation de votre boîtier lorsque
vous êtes travailler. Ne branchez pas lorsque l'appareil est allumé. Un
afflux soudain de puissance peut endommager les composants électro-
niques sensibles. Seulement connu personnel de l'électronique
devraient ouvrir le châssis.
Caution! Equipment is intended for installation in Restricted Access Location.
Caution! Les matériels sont destinés à être installés dans des EMPLACEMENTS
À ACCÈS RESTREINT.
MIC-1810 User Manual 2