Table of Contents
Advertisement
1.2.3
I/O Interface
Serial Ports: 2 x DB-9
Serial Port Speed:
RS-232: 50 ~ 115.2 kbps
RS-422/485: 50 ~ 921.6 kbps (Max.)
LAN:
Intel 82574L 2 x 10/100/1000 Base-T RJ-45 ports, teaming function supported
RealTek 8100CL 4 x 10/100Base-T RJ-45 ports
Audio: Line-out
USB Ports:
6 x USB, UHCI, Rev. 2.0 compliant
2 x Front, 3 x Rear and 1 x Internal ports
Expansion: 3 x Domain I/O expansions (Only slot 1 supports PCIe resource)
Power: Support for each slot
5V@ 2A, 3.3V@1.5A, 12V@0.25A
Maximum 30 Watt for all slot @ condition of 50oC operation temperature
1.2.4
Environment
Humidity: 95% @ 40°C (non-condensing)
Operating Temperature: IEC 60068-2-2 with 100% CPU/ I/O loading, 24 hrs -
20 ~ 70°C
Safety Cert. Temperature: -20~50°C (-4~122° F)
Operating Humidity: 20 ~ 95% (non-condensing)
Shock Protection: IEC 60068-2-27
CompactFlash 50 G half sine, 11 ms
HDD: 10 G half sine, 11 ms
Vibration Protection: IEC 60068-2-64 (Random 1 Oct./min, 1hr/axis.)
CompactFlash® 2 Grms @ 5 ~ 500 Hz
HDD: 1 Grms @ 5 ~ 500 Hz
1.3
Safety Precautions
The following messages informs how to make each connection. In most cases, you
will simply need to connect a standard cable
Warning! Always disconnect the power cord from your chassis whenever you are
working on it. Do not connect while the power is on. A sudden rush of
power can damage sensitive electronic components. Only experienced
electronics personnel should open the chassis.
Caution! Always ground yourself to remove any static electric charge before
touching UNO-4673A/4683 series. Modern electronic devices are very
sensitive to static electric charges. Use a grounding wrist strap at all
times. Place all electronic components on a static-dissipative surface or
in a static-shielded bag.
Note!
If DC voltage is supplied by an external circuit, please put a protection
device in the power supply input port.
Automatic RS-485 data flow control)
4000 V
EFT protection & 2000 V
DC
5
isolation
DC
UNO-4673A/4683 Series User Manual
Advertisement
Table of Contents
