Note:
PCMCIA interrupt assignment is IRQ 9. If you use
Win2000 OS you need to check the IRQ manually.
Note:
For example, if you insert one PCMCIA IDE card, this card will appear in
the IDE ATA/ATAPI controllers (as the figure below). So please pay
attention that the PCMCIA will appear in the difference place of device
manager according to the type of PCMCIA. Please double click on the
PCMCIA device.
UNO-3072 User Manual
Please don't change the IRQ of PCMCIA adapt-
ers. This is PCMCIA controller. (As shown by fig-
ure below) We need to configure the IRQ of the
PCMCIA device, instead of PCMCIA controller.
34