Table of Contents
Advertisement
3.4 Installing a PCI-bus Card
The procedure for installing a PCI-bus card into the UNO-3072 is listed
below. Please follow these steps carefully.
1.
Remove the power cord.
2.
Remove the upper cover of UNO-3072.
3.
Unscrew the screw of a PCI bracket, and remove it.
4.
Plug-in PCI-bus card in a PCI-slot of UNO-3072.
5.
Screw the 1st anti-vibration rubber towards the 1st PCI card until it
is fixed. (Figure 3.2).
6.
Install PCI extension to hold 2nd anti-vibration rubber (Figure 3.3)
and screw the 2nd anti-vibration rubber towards the 2nd PCI card
until it is fixed.
Figure 3.1: 1st Anti-Vibration Rubber
49
Chapter 3
Advertisement
Table of Contents
