Daytime Running Light System; Turn Signal Lever - Subaru 2004 Legacy Owner's Manual

indicator light " " on the instrument panel also
comes on.

Daytime running light system

The tail lights, parking lights, and side marker
lights are not turned on by the daytime running
light system. The light switch must always be
turned to the " " position when it is dark
outside.
The low beam headlights will automatically come on at
reduced brightness when the engine has started, un-
der the following conditions:
The parking brake is fully released.
The light switch is in the "OFF" or "

Turn signal lever

1
2
1) Right turn
2) Left turn
" position.
To activate the right turn signal, push the turn signal le-
ver up. To activate the left turn signal, push the turn
signal lever down. When the turn is finished, the lever
will return automatically. If the lever does not return af-
ter cornering, return the lever to the neutral position by
hand.
To signal a lane change, push the turn signal lever up
or down slightly and hold it during the lane change.
The turn signal indicator lights will flash in the direction
Instruments and controls
HS3027BC
– CONTINUED –
3-21