Subaru 2004 Legacy Owner's Manual page 474

Hide thumbs Also See for 2004 Legacy:

Table of Contents

2. Remove the upper and lower nuts. Then, slide the

rear combination lamp assembly to the rear and re-

move it from the vehicle.

3. Using a Phillips screwdriver, remove the upper and

lower screws that secure the side cover of the rear

combination light assembly.

1) Rear turn signal light bulb

2) Brake/tail light bulb

4. Remove the bulb socket from the rear combination

light assembly by turning it counterclockwise.

2Maintenance and service

– CONTINUED –

Chapters

Table of Contents