Subaru 2004 Legacy Owner's Manual page 473

2Maintenance and service
For covers on the trunk wall:
1) Brake/tail light bulb
2) Rear turn signal light bulb
Unlatch the cover by moving the knob upward and
open the cover.
3. Remove the bulb socket from the light assembly by
turning it counterclockwise.
4. Remove the bulb from the socket.
Rear turn signal light: Remove the bulb from the
socket by pushing it and turning it counterclockwise.
Others: Pull the bulb out of the socket.
5. Install a new bulb in the socket.
6. Set the bulb socket into the rear combination light
11-72
assembly and turn it clockwise until it locks.
7. Close the cover and latch the clock.
1
It may be difficult to replace the bulbs. It is recom-
mended that you have the bulbs replaced by your
SUBARU dealer.
2
UBB035BB
1. Remove the light bulb replacement service hole
covers at two places by prying the edge of the cover
with a regular screwdriver.
Station wagon
Brake/tail and rear turn signal light bulbs
1) Service holes
1
UBB021BB