Subaru 2004 Legacy Owner's Manual page 314

make sure that the parking brake has been fully
released.
To set the parking brake, press the brake pedal firmly
and hold it down while fully pulling up the parking
brake lever.
To release the parking brake, pull the lever up slightly,
press the release button, then lower the lever while
keeping the button pressed.
When the parking brake is set while the engine is run-
ning, the parking brake warning light comes on. After
starting the vehicle, be sure that the warning light has
gone out before the vehicle is driven. Refer to the
"Warning and indicator lights" section (chapter 3).
When parking your vehicle, always set the parking
brake firmly and put the shift lever in the "1" (1st) for an
upgrade or "R" (Reverse) for a downgrade for manual
transmission vehicles, or in the "P" (Park) position for
automatic transmission vehicles. Always set the park-
ing brake firmly when parking your vehicle. Never rely
on the transmission alone to hold the vehicle.
UB4001BA
When parking on a hill, always turn the steering wheel.
When the vehicle is headed up the hill, the front
wheels should be turned away from the curb.
Starting and operating
UB4014AA
– CONTINUED –
7-41