Subaru 2004 Legacy Owner's Manual page 76

Each lower anchorage is located where the seat cush-
ion meets the seatback.
When you install a child restraint system, fol-
low the manufacturer's instructions supplied
with it. After installing the child restraint sys-
tem, check to ensure that it is held securely in
position. If it is not held tight and secure, the
danger of your child suffering personal injury in
the event of an accident may be increased.
1. Use the "Child" marks to locate the two lower an-
chorages (bars) for the position where you want to in-
stall the child restraint system.
UB1088BA
2. While following the instructions supplied by the
child restraint system manufacturer, connect the low-
er hooks onto the lower anchorages located at "
marks on the bottom of the rear seatback. When the
hooks are connected, make sure the adjacent seat-
belts are not caught.
Seat, seatbelt and SRS airbags
US1588CA
– CONTINUED –
1-51
"