Shift Lock Release - Subaru 2004 Legacy Owner's Manual

Starting and operating
fault.

Shift lock release

If the selector lever does not move from the "P" posi-
tion with the brake pedal depressed and the ignition
switch in the "ON" position, perform the following
steps:
To override the shift lock:
1. Set the parking brake and stop the engine.
2. Take out the screwdriver from the tool bag.
P
R
N
D
3
2
1
3. Remove the cover by prying on the edge with the
regular screwdriver.
7-20
4. Insert the screwdriver into the hole.
5. Push down on the screwdriver and move the selec-
tor lever from the "P" to the "N" position.
6. Remove the screwdriver from the hole. Depress
the brake pedal and start the engine.
Take your vehicle to the nearest SUBARU dealer im-
mediately to have the system repaired.
HS7009BA
HS7011BA