High/Low Beam Change (Dimmer); Headlight Flasher - Subaru 2004 Legacy Owner's Manual

Instruments and controls

High/low beam change (dimmer)

To change from low beam to high beam, push the turn
signal lever forward. When the headlights are on high
beam, the high beam indicator light "
strument panel is also on.
To switch back to low beam, pull the lever back to the
detent position.
3-20

Headlight flasher

HS3026CA
" on the in-
Do not hold the lever in the flashing position for
more than just a few seconds.
To flash the headlights, pull the lever toward you and
then release it. The high beam will stay on for as long
as you hold the lever. The headlight flasher works
even though the lighting switch is in the "OFF" posi-
tion.
When the headlights are on high beam, the high beam
HS3026DA