Seat Heater (If Equipped) - Subaru 2004 Legacy Owner's Manual

Seat heater (if equipped)

1) Heating element
The seat heater operates when the ignition switch is
either in the "ACC" or "ON" position.
1
1) Indicator light
UB1073BB
To turn on the seat heater, push the "LO" or "HI" posi-
tion on the switch, as desired, depending on the tem-
perature. Selecting the "HI" position will cause the seat
to heat up quicker.
LO: Normal heating
HI: Rapid heating
The indicator located on the switch comes on when
the seat heater is in operation. When the vehicle's in-
terior is warmed enough or before you leave the vehi-
cle, be sure to turn the switch off.
Seat, seatbelt and SRS airbags
LO
HI
1
UB1093BB
– CONTINUED –
1-9