Air Conditioner Operation - Subaru 2004 Legacy Owner's Manual

Climate control
1. Set the air inlet selection button to the "OFF" posi-
tion.
2. Set the air flow control dial to the "
3. Set the temperature control dial all the way left.
4. Set the fan speed control dial to the desired speed.
When driving on a dusty road, set the air inlet control
lever to the "ON" position.

Air conditioner operation

Cooling or dehumidifying
1) ON position
For cooling and dehumidification of the passenger
4-10
" position.
1
UB5016BB
compartment, performing the following steps will allow
air to flow through the instrument panel outlets:
1. Set the air inlet selection button to the "OFF" posi-
tion.
2. Set the air flow control dial to the "
3. Set the air conditioner button to the "ON" position.
4. Set the temperature control dial to the blue area.
5. Set the fan speed control dial at the highest speed.
Defrosting or defogging
1) ON position
To direct warm air to the windshield and front door win-
dows:
1. Set the air outlet control dial to the "
" position.
1
UB5011BB
" position.