Subaru 2004 Legacy Owner's Manual page 343

Driving tips
Rear crossbar:
1
6 in
(150 mm)
1) T-30 torx® head screw
2) Front arrow label
Install the rear crossbar in the same manner as the
front crossbar.
NOTE
The rear crossbar should be positioned 6 inches
(150 mm) forward of the rear seam (joint) between
the rear roof rail support and the roof rail.
Do not carry cargo on the roof when the cross-
8-24
bars are removed. Luggage on the roof will be
thrown forward or backward in sudden stops or
rapid accelerations, resulting in a dangerous
road hazard.
2
NOTE
Before each use of the roof crossbar, make sure
the four T-30 crossbar clamp screws have been
checked, and retightened if necessary to 35 lbf·in
(4.0 N·m, 0.41 kgf·m), as outlined in Step #5 above.
UB8050BB