Subaru 2004 Legacy Owner's Manual page 481

2Maintenance and service
Station wagon
UBB028BA
1. Remove the mounting screw covers by prying on
the edge with a screwdriver.
2. Remove the mounting screws using a phillips
screwdriver and then remove the high mount stop light
cover.
3. Pull the bulb out of the socket. Install a new bulb.
4. Reinstall the cover.
5. Tighten the mounting screws then reinstall the cov-
ers.
NOTE
Other bulbs may be difficult to replace. Have your
SUBARU dealer replace these bulbs if necessary.
11-80