Subaru 2004 Legacy Owner's Manual page 126

1. Remove the side sill cover on the driver's side.
1) Open the driver's door.
2) Remove the two clips fastening the front portion
of the cover with a screwdriver.
3) Remove the side sill cover by pulling it up.
0
UB2036BA
1) Connector for SRS airbag system (yellow)
2) White (1P)
2. Connect the white (1 pole) connector.
3. Turn the ignition switch from the "LOCK" to the
"ON" position.
4. Install the side sill cover.
To place the system in active arming mode (remote re-
quired for activation), disconnect the white connector.
Keys and doors
1
2
HS2023BB
– CONTINUED –
2-19