Subaru 2004 Legacy Owner's Manual page 372

In case of emergency
surface of the wheel and hub with a cloth.
12.Put on the spare tire. Replace the wheel nuts.
Tighten them by hand.
13.Turn the jack handle counterclockwise to lower the
vehicle.
OM-U0172
OM-U0377
14.Use the wheel nut wrench to securely tighten the
wheel nuts to the specified torque, following the tight-
ening order in the illustration.
The torque for tightening the nuts is 58 to 72 lbf·ft (78
to 98 N·m, 8 to 10 kgf·m). This torque is equivalent to
applying about 88 to 110 lbs (40 to 50 kg) at the top of
the wheel nut wrench. Never use your foot on the
UG0104 wheel nut wrench or a pipe extension on the wrench
because you may exceed the specified torque. Have
11.Before putting the spare tire on, clean the mounting
– CONTINUED –
9-13