Shifting Speeds - Subaru 2004 Legacy Owner's Manual

Hide thumbs Also See for 2004 Legacy:

Table of Contents

The shift pattern is shown on the shift lever knob.

When shifting from 5th gear to reverse gear, first re-

turn the shift lever to the neutral position then shift into

reverse gear.

To change gears, fully depress the clutch pedal, move

the shift lever, and gradually let up on the clutch pedal.

If it is difficult to shift into gear, put the transmission in

neutral, release the clutch pedal momentarily, and

then try again.

Shifting speeds

Recommended shifting speeds

The best compromise between fuel economy and ve-

hicle performance during normal driving is ensured by

shifting up at the speeds listed in the following table.

Maximum allowable speeds

When shifting down a gear, ensure that the ve-

hicle is not travelling at a speed exceeding the

Maximum Allowable Speed for the gear which

is about to be selected. Failure to observe this

precaution can lead to engine over-revving and

this in turn can result in engine damage.

In addition, sudden application of engine

brakes when the vehicle is travelling on a slip-

Starting and operating

– CONTINUED –

Table of Contents