Subaru 2004 Legacy Owner's Manual page 476

10.Reinstall the light bulb replacement service hole
covers.
Back-up and brake/tail light bulbs
1) Back-up light bulb
2) Brake/tail light bulb
1. Unlatch the rear finisher light cover by moving the
knob upward. Open the cover up.
2. Remove the bulb socket from the rear finisher light
assembly by turning it counterclockwise.
1
2
UBB026BC
3. Remove the bulb from the socket by pushing it and
turning counterclockwise. Install a new bulb in the
socket.
4. Set the bulb holder into the rear finisher light as-
sembly and turn it clockwise until it locks.
5. Close the cover and latch the lock.
2Maintenance and service
UBB025BA
– CONTINUED –
11-75