Subaru 2004 Legacy Owner's Manual page 469

2Maintenance and service
1
1) Push
1. Disconnect the electrical connector from the bulb.
2. Remove the bulb from the headlight assembly by
turning it counterclockwise.
3. Replace the bulb with new one.
4. Reconnect the electrical connector. At this time,
use care not to touch the bulb surface.
5. To install the bulb to the headlight assembly, turn it
clockwise until it clicks.
6. Install the headlight bulb cover.
11-68
Except GT and OUTBACK models
UBB044BB
1) Electrical connector
2) Push
1. Disconnect the electrical connector while pressing
the lock release tab.
1
2
UBB045BB