2Maintenance and service
Wheel covers
Removing the wheel cover
Insert the wheel nut wrench into the notch provided,
and pry the wheel cover off.
11-50
Installing the wheel cover
Align the valve with the valve hole in the cover, then fit
UB9032BA
the cover on the wheel by tapping your hand evenly
around the circumference of the cover.
NOTE
When any of the wheels is removed and replaced
for tire rotation or to change a flat tire, always
check the tightness of the wheel nuts after driving
approximately 600 miles (1,000 km). If any nut is
loose, tighten it to the specified torque.
UGA013BA