High/Low Beam Change (Dimmer); Headlight Flasher - Subaru Crosstrek 2016 Owner's Manual

Sensor for the auto on/off head-
lights (if equipped)
The sensor is on the instrument panel as
shown in the illustration.
CAUTION
If any object is placed on or near the
sensor, the sensor may not detect
the level of the ambient light cor-
rectly and the auto on/off headlights
may not operate properly.
High/low beam change
(dimmer)
To change from low beam to high beam,
push the turn signal lever forward. When
the headlights are on high beam, the high
beam indicator light on the combina-
tion meter is also on.
To switch back to low beam, pull the lever
back to the center position.
Instruments and controls/Light control switch

Headlight flasher

CAUTION
Do not hold the lever in the flashing
position for more than just a few
seconds.
To flash the headlights, pull the lever
toward you and then release it. The high
beam will stay on for as long as you hold
the lever. The headlight flasher works
even though the lighting switch is in the
(off) position.
When the headlights are on high beam,
the high beam indicator light
combination meter also illuminates.
3-91
on the
CONTINUED