Fieldbus Protocol - Pavone Systems DAT11 Technical Manual

The following table lists the registers of the input area (produced from the instrument and read by the
master), common to all PROFIBUS, PROFINET, ETHERCAT, ETHERNET/IP fieldbuses.
The registers are 16 bit in size. The input area is updated at a fixed frequency of 125 Hz (80 Hz in
case of PROFIBUS).
The size of the output area configured in the master fieldbus must match the size configured in the
instrument.
INPUT DATA AREA
Register
Byte INPUT AREA REGISTER
address
1-2 0 Status Register
3-4 1 Gross weight (MSB)
5-6 2 Gross weight (LSB)
7-8 3 Net weight (MSB)
9-10 4 Net weight (LSB)
11-12 5 Peak (MSB)
13-14 6 Peak (LSB)
15-16 7 Digital Inputs
17-18 8 Digital Outputs
19-20 9 Monitor register
21-22 10 Net weight weighing (MSB)
23-24 11 Net weight weighing (LSB)
25-26 12 Code weighing (MSB)
27-28 13 Code weighing (LSB)
29-30 14 Set-Point 1 (MSB)
31-32 15 Set-Point 1 (LSB)
33-34 16 Set-Point 2 (MSB)
35-36 17 Set-Point 2 (LSB)
37-38 18 Capacity of load cells (MSB)
39-40 19 Capacity of load cells (LSB)
41-42 20 Sensitivity of load cells
43-44 21 Weight division value
45-46 22 Decimals
47-48 23 Fixed Tare (MSB)
49-50 24 Fixed Tare (LSB)
51-52 25 Stand-by function
53-54 26 Keypad Lock function
55-56 27 Password function
57-58 28 Peak function
59-60 29 Data-Logger function
61-62 30 Data-Logger Trigger
63-64 31 Data-Logger function
65-66 32 Filter factor
67-68 33 Output rate ADC
Number of readings on
69-70 34
average
Page 67

FIELDBUS PROTOCOL

Notes
See relevant table.
INT. value - Most significant word
INT. value - Less significant word
INT. value - Most significant word
INT. value - Less significant word
INT. value - Most significant word
INT. value - Less significant word
See relevant table.
This value corresponds to the same register in the output area.
INT. value - Most significant word
INT. value - Less significant word
INT. value - Most significant word
INT. value - Less significant word
INT. value - Most significant word
INT. value - Less significant word
INT. value - Most significant word
INT. value - Less significant word
INT. value - Most significant word
INT. value - Less significant word
INT. value
See relevant table.
See relevant table.
INT. value - Most significant word
INT. value - Less significant word
INT. value
See relevant table.
INT. value
See correspondence on page 50
See correspondence on page 51
See correspondence on page 51
See correspondence on page 51
See correspondence on page 48
See correspondence on page 48
INT. value