Alibi Memory - Pavone Systems DAT11 Technical Manual

ALIBI MEMORY CONSULTATION
This menu only appears in case of METRIC functioning.
SUB MENU MESSAGGE NAME DESCRIZIPTION TYPE RANGE
Aliby
Procedure for consulting weigh
memory Spc 0÷959999
ALi. N EN SEE. N EN.
stored in aliby memory.
consultation
In case of METRIC functioning and with aliby memory enabled:
• Each executed weigh is stored in the aliby memory.
• For each weighing it is associated an identification code, with value range from 0 to 959999
• The identification code of the weighing is transmitted to the serial port at the time of weighing.
ALIBI MEMORY CONSULTATION PROCEDURE
000000
Enter the ID code of the weighing and confirm with the PRG key.
0. 0 00
The display shows the weight associated with the required identification code. Press the DOWN
key to exit the consultation procedure of the alibi memory.
no Cod.
If the required identification code is not present in the alibi memory, a timed message "NO CODE" is
showed.
Page 55