Using The Keyboard - Pavone Systems DAT11 Technical Manual

The instrument is programmed and controlled through the 3 keys keyboard, with the following functions
SYMBOL
J
J
KEY OPERATION
+
KEY
J
J
J
J
Page 14

USING THE KEYBOARD

DESCRIPTION
Short press on the single key.
Long press on a single key.
J
Access to the set points value programming menu
J
Display selection (gross weight, net weight).
J
(Press and hold) Weight / peak display selection
Net Weight being displayed: Auto-tare (See specific procedure)
J
Gross Weight being displayed: Semi-Automatic zero(See specific
procedure)
J
Transmission of a string from serial (only protocol on-demand on
RS232) for PC/PLC or Printer according serial port setup
J
(Press for 3 sec) Access to set-up menu.
FUNCTION DURING THE PROGRAMMING MENU NAVIGATION
It selects the next menu.
It selects the previous menu.
It exits the programming menu or returns to the upper level..
It accesses the relative sub-menu or programming or confirms the selected
parameter.
FUNCTIONS DURING WEIGHT DISPLAY