Part Replacement Procedure; Belt Unit - Oki C301 Maintenance Manual

Oki Data CONFIDENTIAL

4.2 Part replacement procedure

This section describes the procedure for replacing the parts and assemblies shown in the
disassembly diagrams below.

4.2.1 Belt unit

(1) Open the top cover.
(2) Remove the image drum unit
top cover
Note! Cover the removed image drum cartridges with a piece of black paper.
black paper
44951501TH Rev.2
(3) Turn the (two blue) lock handles of the belt unit
and, holding the unit by the (blue) handle, detach the unit.
4.REPLACEMENT OF PARTS
in the direction of the arrows
Lock lever (blue)
Lock lever (blue)
4-4