3.
Turn the take-up knob (1) in the direction of the moulded arrow to take up any
ribbon slack.
4.
Close the access cover and turn the printer ON.
P
OWERING ON YOUR PRINTER
Operations of this equipment are not warranted when the
equipment is connected to UPS (Uninterruptible Power Supply)
and/or inverter. Doing so may result in damage of this equipment.
Do not use an UPS and/or inverter.
1.
Ensure that your printer power switch is set to OFF.
2.
Connect the power cable connector (1) to the A/C input (2) on the printer.
3.
Connect the power cable to a 220/240 V A/C power outlet (3a) and switch on the
outlet power (3b).
Be careful when inserting a three-pronged A/C plug. Before
plugging it in, check the position of the FG terminal. Incorrect
insertion may cause damage not only to the printer main body but
also peripheral devices and electric shock, smoke and ignition.
4.
Turn the printer power switch ON.
5.
Check that the power indicator on the control panel illuminates.
1
WARNING!
WARNING!
Getting started > 12