Table of Contents
Advertisement
3. If the front latches
are not attaching correctly, check
that the seat is in the full rear
position,
by
pushing down
on the rear of the seat.
4. Firmly push the rear hooks onto the rear floor pins
5,
T r y
to
raise
the seat to
check that
it is
locked down.
A seat that isn't locked into place properly can
move
around in a collision or sud'den stop. People
in the vehicle
could be
injured. Be sure to lock
the seat into place properly when installing it.
6. Lift the seatback recliner lever or pull the nylon strap
on the back of
the seat and raise the seatback until it
locks upright.
7 . Push and pull on the seatback to check that it is
locked in place.
If the seatback isn't locked, it
cl
Id move
forward in a sudden stop or crash. That could
cause injury to the person sitting there. Always
press
rearward on
the
seatback to be
sure
it
is locked.
1-30
Advertisement
Table of Contents
