Table of Contents
Advertisement
Exiting Programming Mode
To exit programming mode, just turn the key from
ACCESSORY to OFF and put the BCM PRGRM fuse
back into the instrument panel
fuse block.
NOTE:
After programming a feature, you can exit the
programming mode at anytime.
Windows
Manual Windows
Power Windows (Option)
Use the manual crank to open and close the
front windows.
If you have power windows, the switches on the driver's
door
m e s t
control the front windows (when the
ignition is in RUN or ACCESSORY). The left switch
eontrols the driver's window. The right switch controls
the passenger's window.
The driver's power window switch has two down
positions. Push the switch to the first position
to
lower
the window normally.
2-50
Advertisement
Table of Contents
