Table of Contents
Advertisement
6.
Remove the seat by
rocking it slightly
toward the rear of the
vehicle and then pulling
it out. This should be
done in one motion.
Replacing the Third Row Solid Bench Seat
Don't put the bench seat in so it faces rearward because
it won't latch that way. If you want more storage room
behind the seat, adjust
the
seat by sliding
it
forward.
The solid benches have seat position labels, located on
the back of the seat, showing where the seat must go.
Follow that diagram. Use all of the sets of floor cups in
the third row, G, H, I and J sets of floor cups. See "Seat
Controls" in the beginning of this section for more
details. The seat must be placed in the proper location
for the legs to attach correctly.
Make sure the seat is in the full rear position before
beginning this procedure.
1. Place the front hooks
of the bench seat onto
the front two floor pins
in
the
third row. To do
this, the seat will need to
be angled so that
the
front hooks clear the
floor pins.
1-15
Advertisement
Table of Contents
