Table of Contents
Advertisement
To use your air inflator system, attach the appropriate
nozzle adapter, if required, to the end of the hose that
has the pressure gage. Then attach that end
of
the hose
to the object you wish to inflate. Remove the protective
Inflating something too much can make
it
cap covering the outlet. Attach the other end of the hose
explode, and you or others could
be
injured. Be
to the outlet. Press the ON switch. The ON switch will
sure to read the inflator instructions, and inflate
work even with the ignition off.
any object only to its recommended pressure.
If the air inflator system does not turn on, the fuse may
be blown or installed incorrectly. See "Fuses and Circuit
Breakers" in the Index or see your dealer for service.
Your air inflator will automatically shut off after about
10
minutes. To reset, press the ON switch again.
Don't
run your air
inflator for longer than 30 minutes at
one time. If you do, you may damage the system. After
30 minutes, wait at least 10 minutes before restarting the
air inflator.
To turn off the inflator, press OFF and detach the hose,
first from the inflated object, then from the outlet.
Replace the protective cap. Place the inflator kit tools in
the pouch, and store in the glove box.
To replace the cover, line up the tabs at the back of the
cover and put it in place. Push down the tab to secure
the cover.
2-79
Advertisement
Table of Contents
