Table of Contents
Advertisement
Programmable Modes
Your vehicle can be programmed to one of the
following modes.
Mode 1: Both Features Off (Doors will always lock
immediately when you press LOCK on the the power
door lock switch or the remote keyless entry transmitter,
if equipped.)
Mode 2: Lockout Deterrent Only (If you leave your key
in the ignition with the
driver's door open, you
won't be
able to lock the doors with the power door locks).
Mode 3: Last Door Closed Locking Only (If the power
door lock switch or remote keyless entry transmitter (if
equipped) is used to lock the vehicle while any door or
the liftgate is open, you will hear three chimes. The
doors will not lock. Five seconds after the last door is
closed, all doors and liftgate will lock.)
Mode
4:
Both Features On (This combines Modes 2
and 3,)
Vehicles are 'delivered programmed in Mode 4.
To change the mode:
1. Follow the instructions for "Entering Programming
Mode" listed previously.
2. Press UNLOCK on the power door lock switch,
3. Count the number of chimes you hear. The
number of chimes tells you which mode your
vehicle is in. You can change the mode by pressing
UNLOCK again.
4. Repeat Step 2 until you hear the number of chimes
The mode you selected
is
now set.
You
can either exit
the programming mode by following the instructions
later in this section or program the next feature available
on your vehicle.
that matches the mode you want.
Remote Driver's
Unlock
Control
With the Remote Driver's Unlock Control feature, you
can program your vehicle to do the following:
When you press UNLOCK on your remote keyless
entry transmitter, the driver's door will unlock and,
When you
press UNLOCK
on your remote keyless
entry transmitter again within five seconds, all doors
and the liftgate will unlock.
To customize this feature to your preference, see
"Programmable Modes" following.
2-44
Advertisement
Table of Contents
