Table of Contents
Advertisement
Error Displays
0
An error of the vehicle's speed sensor or fuel sender
will cause -E- to be displayed.
In the absence of vehicle communications, a double
dash
--
is displayed.
Trip Computer
There are five trip computer displays which may be
stepped through by pushing the MODE button. The
information will appear in the following order:
0
Average Fuel Economy (AVG ECON): This shows
the average fuel economy since the last reset.
0
Instantaneous Fuel Economy (INST ECON):
This shows fuel economy for the most recent
second of driving.
0
0
0
Trip Range (RANGE): This shows the estimated
distance that can be traveled with the remaining fuel.
The fuel economy used to calculate range is
based
on
the last few hours of driving.
Trip Fuel Used (FUEL USED): This shows the
accumulated fuel used since the last reset.
Average Spleed (AVG SPEED): This shows the
average speed since the last reset.
Resetting the Trip Computer
Press and hold the MODE and ELM buttons for at least
two seconds. The reset
is
acknowledged with the display
showing all segments
on
for a period of half a second. A
reset can only be done in AVG ECON, FUEL USED
and AVG SPEED displays. Resetting affects all three
displays regardless of which display you are in.
2-101
Advertisement
Table of Contents
