Table of Contents
Advertisement
4. If the front latches are not attaching correctly, check
that the seat is in the full rear position.
5.
Firmly push the rear hooks into the rear
floor
pins by
pushing down on the rear of the seat.
6 . Try to raise the bench seat to check that it is
locked
down.
A seat that isn't locked into place properly can
move around in a collision
or
sudden stop. People
in the vehicle could be injured. Be sure to lock
the seat into place properly when installing it.
7. Pull the nylon strap on the back of the seat and raise
the seatback until it locks upright.
8. Push and pull on the seatback to check that it
is
locked into place.
If the seatback isn't locked, it could move
forward in a sudden stop or crash. That could
cause injury to the person sitting there.
Always
press rearward on the seatback to be sure it
is locked.
1-17
Advertisement
Table of Contents
