Table of Contents
Advertisement
Second Row Safety Belt Stowage
If your
vehicle has seats in the third row, there
is a
sleeve on the second row outside safety belt to store the
safety belt while entering and exiting the third row of
the vehicle.
If your vehicle has a bench seat in the second row,
follow this procedure:
Pull the belt out and slide the sleeve along the belt
until it reaches the patch
of
Velcro@
on
the roof.
Simply press the sleeve against the Velcro patch to
secure it in place.
Do not have the second row outside safety belt stored
if
someone is
sitting in the second row outside position.
To release the second row outside safety belt, just pull
the sleeve away from the Velcro patch and use the safety
belt as usual. The sleeve should slide freely when not
in use.
There is also a clip on the safety belt used to secure
the belt after it is disconnected from the mini-buckle.
When removing the second row bench seat, secure
the loose end of the safety belt in this clip. This will
keep the safety belt from dangling and possibly
striking something.
Dump and Stow Feature
The rear
seats in
your vehicle, except
the
captain's
chairs, can be folded forward. Use this feature for
exiting and entering third
row
seats.
Push adjustable head restraints fully down. Fold the
seatback flat on the seat. If the seat adjusts, slide it
all
the
way back. Release the rear set of hooks from the floor
pins; hang on to the straps
as
the seat folds forward.
Solid Bench Seat
If you have a solid bench seat, the seatback can be
folded down. The seat can also be folded forward or
removed to provide extra storage space.
1-7
Advertisement
Table of Contents
