Table of Contents
Advertisement
Reading Lamps
To
turn either reading lamp on or off, press the
lamp lens.
Garage Door Opener Compartment
You can store your garage door opener in the rear
compartment of your overhead console, and operate it
from this position. To install your garage door opener,
follow these instructions:
1. Open the compartment by pressing the latch forward
Remove the piece of self-sticking Velcro@.
2. Peel the protective baclung from the Velcro and
press it firmly to the back of your garage
door
opener.
3. Line up the button of the garage
door
opener with
one of the four buttons on the compartment door.
Make sure the garage door opener button is facing
down and
press the
opener firmly into place.
4. Once the opener is installed, use the black pegs
inside the compartment door to make sure the lined
area on the compartment door will contact the
control button on your garage door opener
when pressed.
2-67
Advertisement
Table of Contents
