Table of Contents
Advertisement
Mode 4:
Automatic Unloclung with Transaxle in
PARK (P)
0
Shift into PARK
(P)
with the ignition
on;
all doors
0
Shift out of PARK (P) with the ignition on and the
will unlock automatically.
driver's door closed; all doors will lock automatically.
Vehicles are delivered programmed in Mode 3.
To change the mode:
1. Follow the instructions for "Entering Programming
Mode" listed previously.
2. Press LOCK on the power door lock switch.
3. Count the number of chimes you hear. The number
of
chimes tells you which mode your vehicle is in.
You can change the mode by pressing
LOCK again,
4. Repeat Step 2 until you hear the number of chimes
The mode you selected is n'ow set. You can either exit
the programming mode by following the instructions
later in this section or program the next feature available
on your vehicle.
that matches the mode you want.
Last Door Closed Locking and
Lockout Prevention
With the Last Door Closed Locking and Lockout
Prevention features, your vehicle will do the following:
If you leave your key in the ignition and leave the
driver's door open, you won't be able to lock the
doors using the power door lock switch.
0
When you press LOCK on the power door lock
switch or remote keyless entry transmitter (if
equipped) while any door or the liftgate is open, the
doors will not lock. Instead you will hear three
chimes which let you know that the Last Door
Closed Locking feature is in operation. Five seconds
after all the
doors and
the
liftgate are closed,
all
the
doors and the liftgate will automatically lock.
To customize these features to your preference, see
"Programmable Modes" following.
Advertisement
Table of Contents
