Table of Contents
Advertisement
Resynchronizing Your Remote Transmitter
Your remote keyless entry system uses a continually
changing code for increased security. Normally, the
receiver in your vehicle will keep track of this
changing code.
0
Loss of synchronization will occur if the transmitter
is activated more than 256 times while out of range
of the vehicle.
Loss of synchronization will occur after the battery
replacement if the transmitter is immediately
activated more than 16 times while out of range of
the vehicle.
I f your remote keyless entry transmitter has stopped
working, you may need to resynchronize the transmitter
to
the vehicle receiver. To do this, press the LOCK and
UNLOCK buttons together and hold for at least seven
seconds or until the horn sounds
if
equipped with Content
Theft-Deterrent. Check the transmitter operation.
Switchbanks
There are two sets of switchbanks located in the front of
the vehicle. The switches will vary with the options that
are on your vehicle. It is useful to become familiar with
them since they are used frequently while operating
the vehicle.
Overhead Console Switchbank
This switchbank is located in the overhead console. The
switches that you may find in this switchbank are the
Interior Lamps Override, Power Sliding Door Override,
Power Sliding Door, Power Rear Quarter Windows and
Sunroof. If your vehicle does not have some of the
options controlled by
these
switches, there will be
a
blank button in its place.
For more information, please see each of these features
in the Index.
2-13
Advertisement
Table of Contents
