Table of Contents
Advertisement
Playing a Cassette
Tape
Your tape player is built to work best with tapes that are
30 to 45 minutes long on each side. Tapes longer than
that are so thin they may not work well in this player.
While the tape is playing,
use
the
VOL, FADE, BAL,
BASS and TREB controls just as you do for the radio.
The display will show an arrow to show which side of
the tape is playing. When the down indicator arrow is
lit, selections listed on the bottom side of the cassette are
playing. When the up arrow is lit, selections listed on the
top side of the cassette are playing. The tape player
automatically begins
playing
the other side when it
reaches the end of the tape.
If E and a number appear on the radio display, the tape
won't play because of an error.
0
E10: The tape is tight and the player can't
turn
the
tape hubs. Remove the tape. Hold the tape with the
open end down and try to turn the right hub to the left
with
a pencil. Turn the tape over and repeat.
If the
hubs do not turn easily, your tape may be damaged and
should not be used in the player. Try a new tape to
make sure your player is working properly.
0
Ell: The tape
is
broken. Try
a
new tape.
If any error occurs repeatedly or if an error can't be
corrected, please contact your dealer. If your radio
displays an error number, write it down and provide it to
your dealer when reporting the problem.
PREV (1): Press this button or the SEEK down arrow to
search for the previous selection on the tape. Your tape
must have at least three seconds of silence between each
selection for PREV or SEEK to work. The tape direction
arrow blinks during PREV or SEEK operation. Press
PREV or the SEEK down arrow to stop searching. The
sound will mute during PREV or SEEK operation.
NEXT ( 2 ) : Press this button or
the SEEK up arrow to
search for the next selection on the tape. If you hold the
button, the player will continue moving forward through
the
tape. Your tape must have at least three seconds of
silence between each selection for NEXT or SEEK to
work. The tape direction arrow blinks during NEXT or
SEEK operation. Press NEXT or the SEEK up arrow to
stop searching. The sound will mute during NEXT or
SEEK operation.
PRUG (3): Press this button to play the other side of
the tape.
3-13
Advertisement
Table of Contents
